Modelling of Harmonic Response of Scarf Adhesive Joints



Abstract Views
336

Downloads
315

Citations

Share

##plugins.themes.bootstrap3.article.sidebar##

Submitted Apr 8, 2021
Published Apr 29, 2021
10.24018/ejeng.2021.6.3.2429

Abstract viewed = 336 times

Table of Contents

##plugins.themes.bootstrap3.article.main##

Adhesives are used for attaching structures to various spacers such as tubular and scarf joints to replace the traditional joining methods of welding, brazing, soldering, etc. Many of the unique features associated with adhesives are low manufacturing cost, long component life, and lightweight. Accordingly, a considerable amount of study has been carried out and is still underway to develop. The main objective of this study is to investigate the response of the scarf joints when exposed to a harmonic load. The finite element method (FEM) using ANSYS is availed to study and analysis the natural frequencies, mode shape, and frequency response. Additionally, the influence of the adhesion angle is examined.

Keywords: Adherends; Ansys; Finite Element Modelling (FEM), Scarf Adhesive Joints

Downloads

Download data is not yet available.

References

  1. Alves, D. L., et al. "Experimental and numerical analysis of hybrid adhesively-bonded scarf joints." International Journal of Adhesion and Adhesives 83 (2018): 87-95.‏
     Google Scholar
  2. ‏Carrere, Nicolas, et al. "3D models of specimens with a scarf joint to test the adhesive and cohesive multi-axial behavior of adhesives." International Journal of Adhesion and Adhesives 62 (2015): 154-164.
     Google Scholar
  3. Almitani, Khalid H., and Ramzi Othman. "Analytical solution of the harmonic response of visco-elastic adhesively bonded single-lap and double-lap joints." International Journal of Adhesion and Adhesives 71 (2016): 55-65.‏
     Google Scholar
  4. Harder, Sergej, et al. "Effect of infrared laser surface treatment on the morphology and adhesive properties of scarfed CFRP surfaces." Composites Part A: Applied Science and Manufacturing 121 (2019): 299-30‏.‏
     Google Scholar
  5. Khashaba, U. A., A. A. Aljinaidi, and M. A. Hamed. "Development of CFRE composite scarf adhesive joints with SiC and Al2O3 nanoparticle." Composite Structures 128 (2015): 415-427‏.‏
     Google Scholar
  6. Dorigato, Andrea, and Alessandro Pegoretti. "The role of alumina nanoparticles in epoxy adhesives." Journal of Nanoparticle Research 13.6 (2011): 2429-2441‏.‏
     Google Scholar
  7. Zhai, Lanlan, et al. "The effect of nanoparticles on the adhesion of epoxy adhesive." Materials Letters 60.25-26 (2006): 3031-3033.‏
     Google Scholar
  8. Khashaba, U. A., A. A. Aljinaidi, and M. A. Hamed. "Fatigue and reliability analysis of nano-modified scarf adhesive joints in carbon fiber composites." Composites Part B: Engineering 120 (2017): 103-117.‏‏
     Google Scholar
  9. Riccio, A., et al. "Numerical investigation of constitutive material models on bonded joints in scarf repaired composite laminates." Engineering Fracture Mechanics 173 (2017): 91-106.‏
     Google Scholar
  10. Wang, Suian, Qi Guo, and Zonghong Xie. "Extended analytical model for interfacial stresses of double-lap joints under harmonic loads." International Journal of Adhesion and Adhesives 91 (2019): 23-35.‏
     Google Scholar
  11. Liao, Lijuan, Toshiyuki Sawa, and Chenguang Huang. "Experimental and FEM studies on mechanical properties of single-lap adhesive joint with dissimilar adherends subjected to impact tensile loadings." International Journal of Adhesion and Adhesives 44 (2013): 91-98.‏
     Google Scholar
  12. Sayegh, Ahmed Hasan, Khalid Almitani, and Ramzi Othman. "Numerical Analysis of Adhesive Joints with Bi-Layered Adherends." European Journal of Engineering and Technology Research 5.6 (2020): 731-735.‏
     Google Scholar
  13. Gacoin, A., et al. "Comparison between experimental and numerical study of the adhesively bonded scarf joint and double scarf joint: Influence of internal singularity created by geometry of the double scarf joint on the damage evolution." International journal of adhesion and adhesives 29.5 (2009): 572-579.‏
     Google Scholar
  14. Adin, Hamit. "The investigation of the effect of angle on the failure load and strength of scarf lap joints." International Journal of mechanical sciences 61.1 (2012): 24-31.‏
     Google Scholar
  15. Ting, T., et al. "Composite repairs to rib stiffened panels." Composite Structures 47.1-4 (1999): 737-743.‏
     Google Scholar
  16. Aydin, Murat Demir, Adnan Özel, and Şemsettin Temiz. "The effect of adherend thickness on the failure of adhesively-bonded single-lap joints." Journal of adhesion science and technology 19.8 (2005): 705-718.‏
     Google Scholar
  17. Sancaktar, Erol, and Prasad Nirantar. "Increasing strength of single lap joints of metal adherends by taper minimization." Journal of adhesion science and technology 17.5 (2003): 655-675.
     Google Scholar
  18. Korayem, Asghar H., et al. "Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures." Composites Part B: Engineering 94 (2016): 95-101.‏
     Google Scholar
  19. Loos, M. R., et al. "Enhancement of fatigue life of polyurethane composites containing carbon nanotubes." Composites Part B: Engineering 44.1 (2013): 740-744.‏
     Google Scholar
  20. Khashaba, U. A., A. A. Aljinaidi, and M. A. Hamed. "Analysis of adhesively bonded CFRE composite scarf joints modified with MWCNTs." Composites Part A: Applied Science and Manufacturing 71 (2015): 59-71.‏
     Google Scholar
  21. Jen, Yi-Ming. "Fatigue life evaluation of adhesively bonded scarf joints." International journal of Fatigue 36.1 (2012): 30-39.‏
     Google Scholar
  22. Baldan, A. "Adhesion phenomena in bonded joints." International Journal of Adhesion and Adhesives 38 (2012): 95-116.‏
     Google Scholar
  23. Hayes-Griss, J. M., A. J. Gunnion, and A. Afaghi Khatibi. "Damage tolerance investigation of high-performance scarf joints with bondline flaws under various environmental, geometrical and support conditions." Composites Part A: Applied Science and Manufacturing 84 (2016): 246-255.‏
     Google Scholar
  24. Subramani, T., and Athulya Sugathan. "Finite element analysis of thin walled-shell structures by ANSYS and LS-DYNA." International Journal of Modern Engineering Research 2.4 (2012): 1576-1587.‏
     Google Scholar
  25. Breitzman, T. D, et al. "Optimization of a composite scarf repair patch under tensile loading." composites Part A: Applied science and manufacturing 40.12 (2009): 1921-1930.‏
     Google Scholar
  26. Gustafson, Peter A., and Anthony M. Waas. "The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints." International Journal of Solids and Structures 46.10 (2009): 2201-2215.‏
     Google Scholar
  27. Erdogan, F., and M. Ratwani. "Stress distribution in bonded joints." Journal of Composite Materials 5.3 (1971): 378-393.‏
     Google Scholar
  28. Volkersen, Olaf. "Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten." Luftfahrtfor schung 15 (1938): 41-47.‏
     Google Scholar
  29. Charalambides, M. N., A. J. Kinloch, and F. L. Matthews. "Adhesively-bonded repairs to fibre-composite materials II. Finite element modelling." Composites Part A: Applied Science and Manufacturing 29.11 (1998): 1383-1396.‏
     Google Scholar
  30. Goland, Ma. "The stresses in cemented joints." J. appl. Mech. 17 (1944): 66.‏
     Google Scholar